How To Change The Front And Rear Wheels Of A Car

(1) Asymmetric bias tire transposition. Because the front wheel is worn more than the rear wheel when the tire is in use, the upper and lower sides of the tire can be worn evenly by replacing the tire on the same axle. After using for a period of time, the tire replaced by the front axle can be scrapped, retreaded or used as a spare tire. The new tire is installed on the front wheel. This is more economical and reasonable.

(2) Radial tire transposition. Radial tires should be used on the same side of the vehicle, that is, they should maintain similar rotation directions. The direction of rotation of the radial tire is fixed. If the rotation direction is reversed, the vehicle will lose its handling stability, make the vehicle run smoothly, and cause vibration.

In addition, do not change the position when using snow tires or tires with anti-skid nails. When storing such tires, the rotation direction of the tires during use shall be marked on the tires to ensure that the tires can be reinstalled in the same rotation direction.